The Best Value For Carpet,Tile & Air Duct Cleaning!
This is the BEST way to clean wood floors according to The Cleaning Bug :
“DO NOT…I repeat… DO NOT use vinegar on a wood floor!! I own a cleaning company and am well aware of the damage this method can cause. Vinegar is acidic and will slowly eat away at the poly coating, or wax coating, or oil, whatever your floor is sealed with. It is fine for no-wax linoleum and ceramic but don’t use vinegar on wood floors! If you have new wood floors, using anything but what the manufacturer specifically recommends will void your warranty. When in doubt, use just water. I use a product called EcoMist Colloid W and a Rubbermaid commercial microfiber mop and it gets raves from my clients with wood floors.”
1) Use a soft microfiber dusting pad(preferably with fringe) and run it along all the baseboards without lifting it. Then run it up and down the room, like mowing the lawn, again not lifting the mop. Lifting the mop allows larger debris to get under the mop pad, which can scratch the floors. You want the larger debris to be trapped by the fringe and pushed ahead of you while dust and dirt is trapped by the microfiber pad. This is why swiffer is horrible…it can scratch!
2) Use the hose attachment on you vacuum to run the perimeter of the room and suck up any trapped dirt near the baseboards.
3) Using a spray bottle, mist the floor lightly with water, or a cleaner specifically formulated for wood floors like EcoMist Colloid W, Dr. Bonners, or Method. DO NOT use Murphy’s Oil Soap on your floors, nor should you use Orange Glo. Murphy’s Oil Soap will ruin the floors and Orange Glo makes them dangerously slippery. Again, when in doubt, just use water.
4) After lightly misting a small area, use a seperate microfiber pad that is labeled for wet use and mop the area following the grain of the wood.
5) Continue to spray as you go. The floor should dry behind you. Never dump a bucket of soapy water on a wood floor…it will warp, cup, split, and generally need replacing really quickly